Archive for the ‘Home accessories’ tag
Toilet Bidet And Its Replacing Technique
In the recent years, bidet has acquired quick recognition over the conventional toilets. A bidet is a bathroom fountain that sprays water on your private areas to clean bacteria away. The set up is highly praised because of its high degree of hygiene.
However, bidet unit too is susceptible to plumbing problems. Few plumbing problems associated with the bidet are getting a hammering effect when the bidet is turned on. Also, at many times the mixing valve of the bidet unit often witnesses faults and irregularities. The main causes for a faulty bidet are leaks, a blown gasket or a dirty filter. Filters typically last from six to nine months before needing replacement.
Some of the issues are minor and can be cured or repaired by the by the professional’s aid, while others are serious in which you require to replace the entire bidet arrangement. So, first step is to determine whether the problem can be resolved by the repair or will set by the replacement only.
When it comes to repair the bad part of the bidet, you may need to hire the man who is expert in plumbing. Also, one should compare and contrast different plumbers in order to make sure that you are hiring the best and skilled at best possible prices. Whether replacing a bidet is a choice or a must-do project, follow these steps to complete the task.
To start with, check out the model of the existing model and choose accordingly the new bidet model. Consider the space allotted and the footprint of the new fixture compared to the bidet being replaced. Water inlet pipe at the backside of the bidet should be determined and turned off after you have shut down the water supply for the complete house.
Having turned of the water to the existing bidet, dissociate the pipelines. Gently loosen and remove the water lines from the existing bidet with a crescent wrench. Be cautious, do not deteriorate the outlet pipe.
Line up the new bidet or sink in the existing footprint. Connect the outlet pipe and ensure that is properly fastened. Put on the water supply and check for leaks. Re- tighten the pipes and fittings if needed.
Turn on the water supply and test for drips and leaks. If no leaks are found, no plumber is required. But if case you fail to stop the leaks, call in the plumber to set it right. Moreover, it is good to cover the jointed portion of the connector with the Teflon tape.